Testing
The following tests were run in our Fractal Design Define R3 with the side panel open so we could hear the noise made by the NH-9i. The fans were configured to run off the ASUS Standard PWM profile – we did not use the included voltage regulator / Low Noise Adapter due to the TDP of our i5-2500K CPU being 95W and at the upper limit of the cooler specification. We recorded the delta temperatures – the difference between the reported CPU temperature and the ambient room temperature. In order to record a valid result, the ambient room temperature has to remain the same from the start of the test to the end of the test and must be between 18 and 24 degrees. p
Test Rig
- Intel i5-2500K Sandy Bridge CPU
- ASUS P8Z68-V Pro Gen3 Motherboard
- 16 GB of Corsair Vengeance DDR3 Blue Low Profile RAM
- Fractal Design Define R3 Case – White with USB 3
- Intel Series 510 SSD – 120GB
- Corsair HX-650 Power Supply
- 7x 2TB SATA Hard
The case looked seriously empty when we installed the NH-L9i and I didn’t really appreciate how low it was until I took a couple of really awkward photos from inside the case to see how much it cleared the capacitors by. After taking the photos, I slid a thin piece of card around the edges of the cooler to see of it was making contact with any capacitors and was both relieved and surprised to see that it wasn’t touching anything. This is an example of precision engineering if ever I’ve seen it – I’m talking “millimetre perfect” here.
Fractal Design Define R3 Build log can be found: HERE
Delta Temperature Results
Scenario |
CPU Settings |
Fan Config |
NH-D14 |
NH-L12 |
NH-L12(NF-B9 Only) |
NH-L9i |
Idle | Stock (no OC) | 12 Volts | 8.5 | 7.5 | 9.5 | — |
Load | Stock (no OC) | 12 Volts | 31.75 | 44.5 | 58 | — |
Idle | Stock (no OC) | L.N.A | 9.25 | 9.0 | 9 | 9.7 |
Load | Stock (no OC) | L.N.A | 33.75 | 47.0 | 64 | 58.2 |
Idle | OC @ 4.5 / 1.288v | 12 Volts | 7.25 | 6.5 | – | |
Load | OC @ 4.5 / 1.288v | 12 Volts | 34.5 | 53.0 | – | |
Idle | OC @ 4.5 / 1.288v | L.N.A | 9 | 7.0 | – | |
Load | OC @ 4.5 / 1.288v | L.N.A | 36.25 | 55.3 | – | |
Idle | Stock (no OC) | PWM | – | 8.5 | 9.5 | |
Load | Stock (no OC) | PWM | – | 42.3 | 54.75 | |
Idle | OC @ 4.5 / 1.288v | PWM | – | 7.5 | – | |
Load | OC @ 4.5 / 1.288v | PWM | – | 55.3 | – |
Idle Delta Temperatures
The Idle temperatures are all within a typical margin of error. There is only so low the idle temperature can go an picking idle temps can be finicky because they can change in the blink of an eye. We have included them in the interests of being thorough as the idle temperatures are relevant but for a real comparison, we will be looking at and talking about the load Delta temperatures.
Load Delta Temperatures
When running the NH-L9i with an i5-2500K at stock settings were not much different to our NH-L12 single fan results and still well within the boundaries of safe.